What you’ll learn: what the ratio on a moxa pack actually measures — and the two limits that keep it from being a quality score.
The short answer
The extraction ratio is a processing number: roughly how much leaf went in for how little floss came out. It’s real information — and it isn’t a quality grade.
What it means, in the material’s own terms
“It’s a ratio that tells you how much leaf went in compared to how little floss came out.”
“In the trade, this is called the extraction ratio.”
And the useful consumer read:
“a higher ratio points to finer, purer floss, because more of the coarse leaf material has been sifted away.”
So: higher ratio → finer, purer floss. Once you can read it, “the grade label stops being decoration and starts being information.”
What official grading actually looks at — and it isn’t the ratio
Here’s the twist worth knowing. A Chinese local standard for Nanyang mugwort floss (DB4113/T 021-2022) does grade the material officially — and the parameters it uses are not the ratio:
Official grading parameter (DB4113/T 021-2022, Table 4) |
Grade I | Grade II |
|---|---|---|
| Loft | > 50.0 mm | 25.0–50.0 mm |
| Free-powder content | < 7.0 % | 7.0–15.0 % |
| Microscopic fineness | > 85 % | 60.0–85 % |
| Total ash | ≤ 9.0 % | ≤ 11.0 % |
The standard also sets a floor of raw leaf to floss of at least 3:1 — a threshold, not a ladder. So the official answer to “does a higher ratio mean a higher grade?” is: the grading scheme doesn’t ask that question. It measures physical fineness, dust content, particle size and ash — things you can test, rather than a number a seller chooses.
Our own material makes the same point from the other side: “A higher ratio is not automatically better.”**
Limit 1 · It’s not standardized across sellers
A ratio is self-declared. One brand’s “10:1” and another’s “10:1” are not produced under a shared measurement scheme, so comparing across brands is not comparing like with like. The number compares best against itself: same brand, same line, different grades.
Limit 2 · Fineness is not the same as “better for you”
Finer floss burns differently and behaves differently in different formats — a fact matched by the smoke literature, where floss grade and age changed measured particle output in the same test setup. But “finer” is a description of the material, not a claim about outcomes, and not a medical statement. Our own forms lesson makes the parallel point about formats: the differences “matter for safety and comfort”, not for efficacy.
What we don’t know
- No official standard we could find defines what a stated ratio must mean. As of September 2026, searching the standards bodies we check, we found none — so the number is only as good as the seller’s honesty.
- No published comparison of how ratios translate into real-world burning behaviour across brands and batches (as of September 2026, searching the literature we check). Our own forms lesson notes that form differences “matter for safety and comfort” — but it does not quantify batch-to-batch variance, and neither will we.
Let’s put it together
Read the ratio as a processing fact: finer floss, more sifting. Then ask the two questions that actually decide a purchase — which species, and what do the instructions say — and treat “higher is better” as marketing rather than measurement.
Sources. Moxa Academy: hb-04; Acupuncture in Medicine 2015 (Huang et al., PMID 26516134) (2015); DB4113/T 021-2022Nanyang Mugwort — Moxa Floss (local standard [Regional product standard; not a universal definition.]; full PDF reviewed) (2022); Moxa Academy: fl-10.
